How to install a shower niche

A shower niche is a practical and stylish addition to any bathroom. It provides a convenient storage space for your toiletries and helps keep your shower area organized and clutter-free. Installing a shower niche is a relatively easy DIY project that can be completed in just a few hours with the right tools and materials. In this article, we will guide you through the steps on how to install a shower niche.

Step 1: Choose the Right Location

The first step in installing a shower niche is to choose the right location. It should be located in a convenient spot, where you can easily reach your toiletries while you’re in the shower. Also, it’s important to avoid any structural elements or plumbing that may be behind the wall.

Step 2: Measure and Mark the Area

Once you have selected the location, the next step is to measure and mark the area where you want to install the shower niche. Use a level and a pencil to mark the height and width of the niche on the wall.

Step 3: Cut the Opening

Using a utility knife, score the area you have marked on the wall. Then, use a reciprocating saw or a jigsaw to cut along the marked lines. Be careful not to cut through any electrical or plumbing lines that may be behind the wall.

Step 4: Prepare the Shower Niche

Before installing the shower niche, you need to prepare it for installation. Apply a layer of waterproofing membrane to the back and sides of the niche to prevent moisture from penetrating the wall. Then, install the tile backer board to the sides and bottom of the niche using thinset mortar.

Step 5: Install the Shower Niche

Now that you have prepared the shower niche, it’s time to install it. Apply a layer of thinset mortar to the back and sides of the niche and press it firmly into the opening. Use a level to make sure that the niche is level and flush with the wall. Then, use screws to secure the niche to the studs on either side of the opening.

Step 6: Tile the Shower Niche

Once the shower niche is installed, it’s time to tile it. Apply a layer of thinset mortar to the sides and bottom of the niche and the surrounding area. Then, apply the tiles to the mortar, starting at the bottom and working your way up. Use tile spacers to ensure that the tiles are evenly spaced and level. Cut the tiles to fit around the edges of the niche using a tile saw.

Step 7: Grout the Shower Niche

After the tiles have been installed, it’s time to grout the shower niche. Apply the grout to the spaces between the tiles using a rubber float. Be sure to remove any excess grout with a damp sponge. Let the grout dry for 24 hours.

Step 8: Seal the Shower Niche

The final step in installing a shower niche is to seal it. Apply a layer of silicone sealant around the edges of the niche to prevent water from penetrating the wall. Allow the sealant to dry for 24 hours before using the shower.

In conclusion, installing a shower niche is a relatively easy DIY project that can be completed in just a few hours with the right tools and materials. By following these steps, you can add a practical and stylish storage space to your shower area.

 

Linear Shower Drain | NDRAIN           SUS304 Shower Niche | NDRAIN

Scroll to Top