How to Install a New Bathroom Vanity

The bathroom is one of the most important rooms in your home, and a new bathroom vanity can give it a fresh, updated look. Installing a new vanity may seem like a daunting task, but with the right tools and a little know-how, it can be done easily in just a few hours. In this article, we’ll walk you through the step-by-step process of how to install a new bathroom vanity.

Step 1: Gather Your Tools and Materials

Before you get started, you’ll need to gather all the tools and materials you’ll need for the job. Here’s a list of everything you’ll need:

  • New bathroom vanity
  • Sink and faucet
  • Measuring tape
  • Level
  • Drill
  • Hole saw
  • Jigsaw
  • Adjustable wrench
  • Pipe cutter
  • Plumber’s putty
  • Silicone caulk
  • Shims
  • Screws

Step 2: Remove the Old Vanity

The first step in installing a new bathroom vanity is to remove the old one. Start by turning off the water supply to the sink, and then disconnect the water supply lines and drain pipe from the sink. If you have a wall-mounted vanity, you’ll need to remove the mounting screws from the wall. If you have a floor-mounted vanity, you’ll need to remove the screws from the base.

Once the vanity is free, lift it up and out of the bathroom. Be sure to have a helper to assist you if the vanity is heavy.

Step 3: Prepare the Area for the New Vanity

With the old vanity removed, you’ll need to prepare the area for the new one. Start by measuring the height, width, and depth of the opening where the new vanity will go. Use these measurements to select a new vanity that will fit in the space.

Next, use a level to ensure that the floor is level. If it’s not, use shims to level it out.

Step 4: Install the New Vanity

Once the area is prepared, it’s time to install the new vanity. Start by attaching the faucet and sink to the vanity. Use plumber’s putty to create a watertight seal around the base of the faucet, and then tighten the mounting nuts with an adjustable wrench.

Next, use a hole saw to cut a hole in the back of the vanity for the drain pipe. Use a jigsaw to cut out any additional holes needed for the plumbing.

With the plumbing in place, place the new vanity in the opening and use shims to level it. Secure the vanity to the wall using screws and a drill.

Step 5: Connect the Plumbing

With the vanity in place, it’s time to connect the plumbing. Start by connecting the water supply lines to the faucet, and then connect the drain pipe to the sink. Use a pipe cutter to trim the drain pipe if needed.

Once the plumbing is connected, turn on the water supply and check for leaks. If there are no leaks, apply a bead of silicone caulk around the base of the vanity to create a watertight seal.

Step 6: Finish the Installation

With the plumbing connected and the vanity secured in place, it’s time to finish the installation. Install any drawers or shelves that came with the vanity, and then add any finishing touches such as new hardware or a backsplash.

Step 7: Enjoy Your New Bathroom Vanity

With the installation complete, it’s time to enjoy your new bathroom vanity! Not only will it give your bathroom a fresh, updated look, but it will also provide you with more storage and counter space.

Installing a new bathroom vanity is a simple task that can be completed in just a few hours.

 

Linear Shower Drain | NDRAIN           SUS304 Shower Niche | NDRAIN

Scroll to Top