When it comes to bathroom faucets, there are many different types and styles available. One popular option is the waterfall faucet, which is designed to create a waterfall-like flow of water from the spout. Installing a bathroom waterfall faucet can be a great way to add a touch of elegance and luxury to your bathroom. However, it can be a bit more complicated than installing a standard faucet. In this article, we will walk you through the steps involved in installing a bathroom waterfall faucet.
Step 1: Gather Your Tools and Materials Before you begin the installation process, you will need to gather all the necessary tools and materials. Here is a list of what you will need:
- Waterfall faucet kit
- Adjustable wrench
- Basin wrench
- Teflon tape
- Plumbers putty
- Silicone sealant
- Screwdriver
- Channel lock pliers
- Towels
Step 2: Prepare the Sink The first step in installing a bathroom waterfall faucet is to prepare the sink. This involves removing the old faucet and cleaning the surface of the sink. Here is what you need to do:
- Turn off the water supply to the sink.
- Remove the old faucet by loosening the nuts that hold it in place. Use an adjustable wrench and a basin wrench if necessary.
- Clean the surface of the sink with a towel to remove any debris or leftover putty.
Step 3: Install the Base Plate Once the sink is prepared, you can start installing the base plate of the new faucet. Here is what you need to do:
- Place the base plate over the holes in the sink where the old faucet used to be.
- Ensure that the base plate is level and centered.
- Apply a thin layer of plumbers putty around the edges of the base plate.
- Insert the bolts through the holes in the base plate and screw them into the sink using a screwdriver.
Step 4: Install the Waterfall Faucet With the base plate installed, you can now start installing the waterfall faucet. Here is what you need to do:
- Insert the gasket into the bottom of the faucet and attach the mounting hardware.
- Insert the faucet through the center hole in the base plate.
- Tighten the mounting hardware using a wrench.
- Attach the water supply lines to the faucet. Use Teflon tape to ensure a tight seal.
- Turn on the water supply and check for leaks.
Step 5: Install the Drain Finally, you will need to install the drain for your new waterfall faucet. Here is what you need to do:
- Remove the old drain from the sink by unscrewing the nut underneath the sink.
- Insert the new drain into the sink and tighten the nut using channel lock pliers.
- Apply silicone sealant around the edges of the drain to ensure a tight seal.
- Install the drain stopper according to the manufacturer’s instructions.