A well-lit bathroom is essential for proper grooming and a great way to achieve this is by installing a bathroom mirror with lights. Not only does it brighten up your space, but it also adds a touch of elegance to your bathroom. Installing a bathroom mirror with lights may seem like a daunting task, but with the right tools and knowledge, it can be an easy DIY project. In this guide, we will take you through the steps of how to install a bathroom mirror with lights.
Step 1: Choose the Right Bathroom Mirror with Lights
Before starting the installation process, it is important to choose the right bathroom mirror with lights. There are several types of bathroom mirrors with lights available in the market, including framed, frameless, backlit, and side-lit mirrors. You should consider the size of your bathroom and the placement of the mirror. A large bathroom can accommodate a larger mirror, while a small bathroom may require a smaller one.
Also, consider the type of lighting that you want. Do you want a bright, white light or a warmer yellow light? You should choose the type of lighting that best suits your needs and preferences.
Step 2: Gather the Required Tools
To install a bathroom mirror with lights, you will need the following tools:
- Screwdriver
- Drill
- Level
- Measuring tape
- Pencil
- Anchors and screws
- Wire nuts
Step 3: Turn Off the Power Supply
Before you begin the installation, make sure to turn off the power supply to the bathroom. You can do this by turning off the switch at the main electrical panel or by turning off the circuit breaker that powers the bathroom.
Step 4: Measure the Height and Width of the Bathroom Mirror
Measure the height and width of the bathroom mirror, and mark the center of the wall where you want to install the mirror. Use a pencil and level to ensure that the line is straight.
Step 5: Install the Mounting Bracket
Using a drill, create pilot holes for the mounting bracket. Hold the bracket up to the wall and insert the screws through the holes in the bracket and into the wall. Make sure the bracket is level before securing it in place.
Step 6: Install the Wiring
Once the bracket is securely mounted, it is time to install the wiring. Run the wires through the hole in the wall and connect the wires to the corresponding wires in the junction box. Use wire nuts to secure the connections.
Step 7: Attach the Bathroom Mirror
Attach the mirror to the mounting bracket. Some mirrors come with a hook that you can hang on the bracket, while others require you to screw the mirror onto the bracket.
Step 8: Install the Light Fixtures
Install the light fixtures onto the mirror. Depending on the type of bathroom mirror with lights that you have chosen, the light fixtures may be built into the mirror or they may need to be installed separately.
Step 9: Turn on the Power Supply
Once the light fixtures are installed, turn on the power supply to the bathroom. Turn on the switch and test the lights to ensure that they are working properly.
Step 10: Clean the Bathroom Mirror
Finally, clean the bathroom mirror with lights using a mild cleaner and a soft cloth. Avoid using abrasive cleaners or rough cloths as they can scratch the mirror.
Conclusion
Installing a bathroom mirror with lights is a great way to add both style and functionality to your bathroom. With the right tools and knowledge, it can be an easy DIY project. Remember to choose the right bathroom mirror with lights, turn off the power supply before starting the installation, and use a level to ensure that the mirror is straight.