How to fix a dripping shower head

A dripping showerhead can be an annoying and wasteful problem. Not only can it cause a constant dripping sound, but it can also waste a significant amount of water over time. Fortunately, fixing a dripping showerhead is a relatively easy DIY task that can be done without the need for professional help.

In this article, we will go over the steps to fix a dripping showerhead so that you can enjoy a leak-free shower and conserve water.

Step 1: Turn off the water supply

Before you start working on the showerhead, it’s essential to turn off the water supply. Look for the water shut-off valve in your bathroom or the main water supply for your home. Once you find it, turn off the water supply to your shower.

Step 2: Remove the showerhead

Next, you need to remove the showerhead from the shower arm. To do this, wrap a piece of cloth around the showerhead’s base to protect the finish and use pliers to unscrew the showerhead from the shower arm. If the showerhead is difficult to remove, you can use a wrench to help you unscrew it.

Step 3: Inspect the showerhead

Once you have removed the showerhead, you need to inspect it for any damage or wear and tear. Check the rubber washer inside the showerhead for any cracks or deformities, as this is often the cause of a dripping showerhead. If the rubber washer looks damaged, it’s best to replace it.

Step 4: Replace the rubber washer

To replace the rubber washer, you need to remove the old washer from the showerhead and replace it with a new one. You can find replacement rubber washers at your local hardware store or online. Make sure to choose the right size and type of washer for your showerhead.

To replace the washer, remove the old washer by pulling it out with pliers or a screwdriver. Then, insert the new washer into the showerhead, making sure it is seated correctly.

Step 5: Reattach the showerhead

Once you have replaced the washer, it’s time to reattach the showerhead to the shower arm. Make sure the threads on the showerhead and shower arm are clean before screwing the showerhead back into place. Use pliers or a wrench to tighten the showerhead to the shower arm, but don’t overtighten it as this can cause damage to the showerhead.

Step 6: Turn on the water supply

After reattaching the showerhead, it’s time to turn the water supply back on. Turn on the water supply to your bathroom or the main water supply for your home. Turn on the shower and check to see if the showerhead is still dripping. If it is, you may need to repeat the process or call in a professional for assistance.

Additional tips:

  • If the rubber washer doesn’t fix the problem, you may need to replace the entire showerhead. You can find a variety of showerheads at your local hardware store or online.
  • If you need to use a wrench to remove the showerhead, make sure to use a cloth or tape to protect the finish and prevent any scratches or damage.
  • It’s a good idea to clean the showerhead periodically to prevent any mineral buildup or clogs that can cause dripping or reduced water flow. You can soak the showerhead in vinegar or a cleaning solution and scrub it with a brush to remove any buildup.

Linear Shower Drain | NDRAIN           SUS304 Shower Niche | NDRAIN

Scroll to Top